Configuration Instructions

Maintenance and system operation
'Extras' > 'System' menu
10
192 | 219
A6V10429097_en--_e
10.2.2 Change Cyclic Intervals
The 'Cyclic Interval [ms]:' value determines how often vital state values and control
data are distributed over the 'PACE-Net'.
The default value is 100 ms. Lower values reduce the response time of operations.
In the case of large systems, the default value can be increased to approx. 300 ms
in order to reduce the base network load.
It is only possible to edit devices with saved configuration changes.
In example 2 below, two devices have unsaved changes and so cannot be edited.
All updated values are listed in the dialog.
Change Cyclic Intervals
1. Filter by systems or collections, as required.
2. Click on the icon to select the stations.
3. Confirm the selection with 'OK'.
 Similar dialog fields to those shown in the examples below will appear.
4. Change the values and confirm with 'OK'.
Fig. 141: Changing cyclic intervals: Example 1
Fig. 142: Changing cyclic intervals: Example 2