Configuration Instructions

Maintenance and system operation
File Toolbar
10
A6V10429097_en--_e
201 | 219
– By default, the name is prefixed with the current date and time.
4. Choose from the options below:
Option
Description
Collect Full Station
Contents
Stores the whole configuration block of all devices found to
the local hard drive.
This option must be enabled to use the 'Clone Station'
feature
Update unsaved
changed before
reading from Flash
All none permanent changes are written to the flash
memory.
Update Mirror Copy
Creates a backup of the actual configuration inside the
device. This could be used to restore the complete device
configuration without having a snapshot
Read Error Logging
Lists
If a station has the error logging feature switched on, the
detected errors will also be stored to the local hard drive
Read Injected
Sounds
If this option is enabled, the 384 kB sample file stored in the
devices is included in the snapshot so that the audio file can
be analyzed and played offline.
Store available SD-
Card Infos
If this option is selected, all available wave headers – i.e.,
the first kB of the audio file – are included in the snapshot.
1. Click on the 'OK' button to start the process.
 The progress bar shows the processing status.
 After completion, the path to the snapshot file is shown.
2. Click on 'OK' to finish the creation of the snapshot.