Configuration Instructions

User interface
'System Lists'
4
34 | 219
A6V10429097_en--_e
4.3.3 System Lists: 'Stations'
Shows the station state and devices which are detecting or causing an ongoing
fault. You can print the list by pressing <Ctrl> + <P>.
Fig. 8: Stations
The list is empty until the 'Show just errors' checkbox is unchecked or an error is
detected for a station. If an error occurs, detailed information about the fault is
displayed.
The 'Show just errors' checkbox is checked by default. If unchecked, then
additional information like device voltages, monitored microphones, command
processing speeds, and modified status are listed.
If the 'Refresh' button is activated, this updates the whole list once every second,
otherwise the displayed values are static. The label 'Update:' shows the time when
the list was last updated.