Configuration Instructions

User interface
'PACE-Net API'
4
A6V10429097_en--_e
39 | 219
4.4 'PACE-Net API'
The 'PACE-Net API' tab can be used to enable access on an external API
interface. This TCP/IP interface enables external applications to generate graphical
user interfaces, which can control the sound level and/or the program channel of
audio outputs.
Fig. 14: 'PACE-Net API' tab
Server host and port configuration
To edit the API server configuration, uncheck the 'Enable API Server' checkbox.
The host is the corresponding local computer. The user cannot select the host.
When the configuration is complete, start the API server by rechecking the 'Enable
API Server' checkbox.
If the 'Enable API Server' checkbox is checked, the server will start automatically
when the 'PACE-Design' starts.
The default local Port of the server is 18518. Use the 'Resolve Names' checkbox to
resolve the clients' names from their IP addresses.
If the network configuration is buggy, the server may be blocked during name
resolution. In this case, uncheck the 'Resolve Names' checkbox.