Configuration Instructions

System configuration

Step by step guide to configure a new system

44 | 219

A6V10429097_en--_e

Equalizing/signal processing

1. Open the 'Audio Processing' configuration page.

2. Configure the delay, equalizer curve or compressor/limiter.

Automated announcements on the SD card

1. Check that the SD card contains all the required files.

2. Save additional files via the 'Write to SD Card' functionality if necessary.

Call stations

1. Open the 'Digital Inputs, Digital Input Mode (Keypad)' configuration page.

2. Define the default button function as listed below:

Button

Function

Remark

SELECT

ALL

SELECT

NONE

PLAY

SOUND

Double-click on an audio file to inject it directly into the

flash.

TALK

1. Add 'ZONE SELECT' buttons.

2. Define output zones in the 'Zone Select Table' for each button, see chapter

'Zone Select Table – Regular Keypad' [➙ 147].

3. If automated announcements are used, add 'PLAY FROM SD' buttons and

define a '*.wav' file.

4. Name all buttons and use the 'Print Paper Strips' function to complete the

hardware configuration of a 'Desk call stat. (19 buttons)'.

Audio output for priority channels

1. Open the Audio Output Priority Table of a station.

2. Add call station priority channels.

3. Define a priority for each entry.

Logic Inputs / Outputs

◈

Assign functions and parameters to each individual digital input and output.

Checking the sound level

1. Check that the amplifier functions work.

2. Play background music into a zone.

3. Adjust the gain levels of the output until the sound level in the zone reaches the

desired value.

4. Execute a priority call via microphone.

5. Set up the gain level with the 'Priority Volume' meter.

6. Check the levels of the automated announcements from the SD card.