Configuration Instructions

System configuration
Creating a system password
5
46 | 219
A6V10429097_en--_e
5.3 Creating a system password
1. Read chapter System Protection [➙ 159].
2. Check that all devices are in the same system.
3. Check the 'System Name' entry in the 'Basic Station Configuration' dialog.
Go to the 'System Overview' tab, press the <Ctrl> key and move the mouse over
the modules to show stations sharing the same system name.
4. Then select 'Extras' > 'System Protection' > 'Protect unprotected System' >
'Protect <my system name>'.
5. The dialog window for entering a 'SYSTEM' password appears.
6. Enter a password with at least six characters and confirm with 'OK'.
7. The 'Protection' window opens.
8. Configure the following settings:
● ACL Access Control List
● Users and their permissions
● Change password