Configuration Instructions

System configuration
Setting up a loop isolator speaker system
5
A6V10429097_en--_e
63 | 219
Example 3: Loop 1 in 'BREAK' state
Fig. 31: 'LineDetection' statistics example 3
Speaker line 1 RMS 31 V
Impedance 208 ohms at 20 kHz
Speaker line 2 RMS 31 V
Impedance 248 ohms at 20 kHz
● Voltage is above 25 V = very good
● The impedance value of line 1 is similar to line 2 (208 ~ 248). This means that
the isolated segment is in the middle of the loop.