Configuration Instructions

System configuration
Using the PT2006 remote control panel
5
A6V10429097_en--_e
73 | 219
5.14.4 Example Project
● Three remote control panels are connected to a 'Digital audio matrix (4/4/4)'.
● Panel 2 should be able to control outputs 1+2.
● Panel 3 should be able to control outputs 3+4.
● Panel 10 should be able to control each output individually.
● All panels are able to choose from the same channel list: '100 Tuner', '101 CD'.
Fig. 40: Example Project
Preset 1
Name
Value
Remark
Allowed views
Vol and Ch +/-
Common for all panels
Station ID
507
Common for all panels
Audio Outputs
1 + 2
Route this to ID 2
Channels
100, 101
Common for all panels
Preset 2
Name
Value
Remark
Allowed views
Not used
Not required, as already specified under
Preset 1. This configuration can be
reused.
Station ID
Not used
Audio Outputs
3 + 4
Route this to ID 3
Channels
Not used
Preset 3