Configuration Instructions

System configuration
Using keypad macros
5
94 | 219
A6V10429097_en--_e
Macro ID
Additional params
Description
Supported button modes
'N'
asc(78)
0x4E
Deselect all activated
zones for this station
Clear all zones
'Select no zones'
PlaySound_FLASH,
PlaySound_SD,
Macro_Mode
'Talk' / 'Talk2' Button
PushButton
Switch L>H (2)
'p'
asc(112)
0x70
Pre- and Post-Signalisation
Byte0:
PreSignalisation if Press
PostSignalisation if
Release
'Pre- and Post-Signalization'
0=none
1...4: 001.wav-004.wav
5: internal flash
6…7: Synthetic sound
'Talk', 'Talk2' Button (2)
V1.2B10 supports local
signalisation via MSB
'R'
asc(82)
0x52
Reset audible warning
able to reset the local
buzzer
To handle a local buzzer on audible
warning.
'Reset the local buzzer'
Macro_Mode
'S' asc(83),
0x53
Silencing
Byte0:
0... Only silence active
Sound
1… F3033-compliant
silencing and buzzer reset,
LEDState=silence
2... EN 54-16 silencing
(prepared)
While a SDFile is played this macro
silence the sound and keep the feed
'This macro silences the sound, but
keeps the feed active'
Macro_Mode
PlaySound_FLASH
PlaySound_SD
'T'
Asc(84)
0x54
-
Talk key. The state of talkkey
corresponds with the state of the
Keypad input state
'In addition to this button, a configured
Talk button is also pressed.'
Zone Select,
Macro_Mode
't'
asc(116)
0x74
Byte0: timeout value in
10 s resolution
[10...2400] s = 40 min 0 =
not allowed
Talk timeout
'An active state of this button is
canceled after the given timeout'
'Talk', 'Talk2' Button (2)
‘V’
asc(86)
0x56
Byte0: modType (abs=1,
inc=2, dec=3, useScale=4)
Byte1: value in ½ dB
5=2.5dB
Byte2: outputmask
Byte3-4:
stationID(0=SuppSelf)
Volume
'Lautstärke des spezifischen
Ausgangskanals erhöhen oder
verringern'
Macro_Mode
‘Y’
Asc(89)
0x59
Set SysVar
Set specific SysVar
0...set local LEDTestMode
1...set all concerned local zones
Could be used together with zone
keys to select all zone keys which
include the zone in the pressed key
2...set Macro Flag
3...reset Macro Flag
FW1.3B0-1
Macro_Mode