Configuration Instructions

Configuration pages – Overview
'Basic Station Configuration'
6
A6V10429097_en--_e
97 | 219
6 Configuration pages – Overview
The configuration area for each device is spread over various configuration pages.
There are global configuration pages for all device types – e.g., the 'Basic Station
Configuration' page – as well as device-specific configuration pages that are only
available for a specific device type or a specific hardware option.
The 'System Tree' [➙ 29] area shows configuration pages that are available for all
devices.
Further configuration pages that are specific to the device can be displayed on the
subsequent tabs by right-clicking to access the context menu for a device:
● 'System Overview' [➙ 27]: Device list on the left-hand side and in the drawing
area
● 'System Tree' [➙ 29]: Device symbol in the configuration page header
● 'System Lists' [➙ 31] / System Lists: 'Audio Feeds' [➙ 31]: Columns 'ID' and
'Station'
● 'System Lists' [➙ 31]: Context menu of each displayed device
6.1 'Basic Station Configuration'
This configuration page shows the low level configuration for a module. Whenever
a new project is created, the low level configuration is the one that should be
performed first. All configuration changes made in this dialog will be stored
immediately and permanently in the flash of the device.
Click on the 'History …' button to open a module history showing the most recent
firmware updates, station ID changes, and/or other major changes to the device
configuration.