Installation Instructions

Connect external components
Call station PT2009-A1
7
114 | 122
A6V11899867_en--_a
7.5.6 Analog audio outputs
The PT2009-A1 provides 1 analog audio speaker output. This analog audio
speaker output 1 is used for the mounted speaker.
Analog audio speaker output 1 connector - 'X2'
Pin
Description
Remark
1
Signal +
-
2
Signal -
-
Table 91: PT2009-A1 analog audio speaker output 1 connector - 'X2'
7.5.7 Extension connector
The PT2009-A1 provides 2 extension connectors.
One of the extension connectors is used to connect the 'Call station extension
(RS485, 8)' PTO2006-A1, the other is not used on the PT2009-A1.
Extension connectors - 'X1' and 'X5'
Pin
Description
Remark
1
GND
-
2
24 V
-
3
NC
Do not use this pin
4
3.3 V
3.3 V is not required to connect the
extension module
5
SDA
-
6
SCL
-
Table 92: PT2009-A1 extension connectors - 'X1' and 'X5'