Installation Instructions

Mounting/Installation
Mount and install PN1001-A1
4
44 | 122
A6V11899867_en--_a
4.11 Mount and install PN1001-A1
Two 'Ethernet switch (1x4)' PN1001-A1 can be mounted on the Cerberus PACE
Compact audio matrix board in the options area ('Switch A' and 'Switch B'). They
are plugged on the selected positions. Each one is fixed with 2 screws. One
PN1001-A1 provides 4 additional copper Ethernet cables (CAT5) with RJ45
connectors.
A redundant 'PACE-Net' star or tree structure can be created with 2x PN1001-A1.
The PN1001-A1 doesn’t offer the ring structure. A 'Planet IGS-10020MT Ethernet
Switch' PN2005-A1 is used to create a ring structure.
4.12 Install the micro SD card
The Cerberus PACE Compact systems PC1001-A3 and PC1002-A3 are equipped
with a micro SD card slot in the options area.
The micro SD card is pre-installed. To change the micro SD card, pull it out from
the micro SD card slot and insert a new one in the correct direction.
The micro SD card is used to store messages and sound files.
Only the approved industrial grade SD card should be used. (Preferred: 'ATP
AF2GUD-2*** SD 2 GB Card' PCA2002-A1)
Fig. 19: Position of the SD card slot