Planning

Planning call stations
PACE-Bus RS485 call station PT2003, PT2009
8
A6V11899877_en--_b
37 | 46
8.2.2.2 Power supply PT2009-A1
PT2009-A1 power supply via copper Ethernet cable (CAT5), DC 24 V with
PTO2008-A1.
Fig. 15: Daisy chain wiring of multiple PT2009-A1 in standard use case
1
Cerberus PACE Compact cabinet
2
External Desk call station (RS485, 8+1) PT2009-A1 with accessories
3
MeanWell SD-50B-24 DC/DC PCA2011-A1 or MeanWell SD-100B-24 DC/DC
PCA2018-A1
4
Ground fault monitoring (24V) PCA2001-A1
5
ICPDAS I-7510 (RS485, isolated) PNA2009-A1
6
Call station interface (RS485) PTO2008-A1
7
Wiring to PTO2008-A1
8
Copper Ethernet cable (CAT5) with RJ45 connector, connecting PTO2008-A1
to the first PT2009-A1
9
Copper Ethernet cable (CAT5) with RJ45 connector, connecting one PT2009-
A1 to the next
The figure above displays an example of daisy chain wiring of multiple PT2009-A1
being connected to one cabinet. This wiring can only be utilized in standard use
cases and is not permitted in evacuation use cases.
PCA2011-A1 and PCA2018-A1 (3) provide isolated DC 24 V. A short circuit
outside of the cabinet has no impact on the whole cabinet.
The PCA2001-A1 (4) detects a ground fault on the 24 V wiring to PT2009-A1.
PT2009
DC/DC
PCA2011
PCA2018
PT2009
DC 24 V
Cabinet
PTO2008
RS485
intern
PT2009
RS485 isol
PNA2009
RS485
interf
Fuse
11
13
14
1
5
16
17 18
19
Ground Fault
PCA2001
1
9
CAT5
CAT5
CAT5
1
2
1
2
12