Mounting Instructions

Connect external components
Network repeater PNA2007-A1
7
162 | 173
A6V10430579_en--_b
7.10 Network repeater PNA2007-A1
A standard CAT5 copper Ethernet wiring is limited to a length of 100 m. The
PNA2007-A1 enables the extension of the CAT5 copper Ethernet wiring by
additional 100 m. The PNA2007-A1 comes in a connector box and requires a
supply voltage of DC 24 V.
Fig. 104: PNA2007-A1 connector overview
7.10.1 Installation
Power supply DC 24 V
The DC 24 V power supply connector 'X1' is used to supply the PNA2007-A1 with
power.
DC 24 V power supply connector - 'X1'
Pin
Description
Remark
1
DC 0 V
Pre-installed on the repeater board
2
DC 0 V
-
3
DC 24 V
Pre-installed on the repeater board
4
DC 24 V
-
5
DC 0 V
Connect 24 V power
6
DC 0 V
24 V to the next external component
7
DC 24 V
Connect 24 V power
8
DC 24 V
24 V to the next external component
Table 131: PNA2007-A1 DC 24 V power supply connector - 'X1'
DIN Rail
CN4
CN3
1
J1
1
CN2
CN1
1
J1
1
1
4
5
8
X1
J2
J1
PNA2007 Connector box
Repeater board