Mounting Instructions

Install internal components
Digital audio matrices PC2001-A1, PC2002-A1, PC2005-A1 and PC2006-A1
6
40 | 173
A6V10430579_en--_b
6.2.1 Connect DC 24 V power supply
The digital audio matrices provide one DC 24 V power supply connector each.
Fig. 8: PC2001-A1, PC2002-A1, PC2005-A1 and PC2006-A1 power supply connector
DC 24 V power supply connector
Pin
Description
Remark
1
DC 24 V
Power supply input
2
DC 0 V
Power supply input
Table 2: PC2001-A1, PC2002-A1, PC2005-A1 and PC2006-A1 DC 24 V power supply connector
6.2.2 Connect PACE-Net Ethernet
The digital audio matrices provide 2 'PACE-Net' copper Ethernet (CAT5) RJ45
sockets (A and B) at the rear of the housing.
Connect an 'Ethernet switch (2x4/2)' PN2001-A1 or a 'Planet IGS-10020MT
Ethernet Switch' PN2005-A1 to extend the amount of 'PACE-Net' Ethernet
connections. The Ethernet switches are used to connect further Cerberus PACE
modular or Cerberus PACE Compact systems, 'PACE-Net' call stations or a PC
with the configuration tool 'PACE-Design' installed.
Fig. 9: PC2001-A1, PC2002-A1, PC2005-A1 and PC2006-A1 network connector
Always connect port A (ETH A) with an Ethernet switch.
A redundant Ethernet connection can be established by connecting socket port B
(ETH B) with an Ethernet switch. It can be the same switch or, for higher
redundancy, another Ethernet switch in the system. If the connection on port A
fails, the digital audio matrix uses automatically port B for the communication.
1
Power
ETH B ETH A