Mounting Instructions

Install internal components
Digital audio matrices PC2001-A1, PC2002-A1, PC2005-A1 and PC2006-A1
6
48 | 173
A6V10430579_en--_b
6.2.10 Connect analog audio outputs
The digital audio matrices provide 4 XLR connectors ('OUT1' to 'OUT4') with 4
balanced analog audio outputs at the rear of the housing.
The analog audio outputs are used to connect analog audio components like small
speakers or audio amplifiers to the digital audio matrix.
The 4 analog output signals ('OUT1' to 'OUT4') are balanced. The maximum output
level is +15 dB.
Fig. 19: PC2001-A1, PC2002-A1, PC2005-A1 and PC2006-A1 analog audio output connection
Analog audio output connectors – 'OUT1' to 'OUT4'
Fig. 20: Analog audio output XLR connector
Pin
Description
Remark
1
GND
GND reference voltage
2
Audio out +
-
3
Audio out -
-
Table 10: Analog audio output connectors - 'OUT1' to 'OUT4'
1 2
3
Signal +
Signal -