Mounting Instructions

Install internal components
Power amplifier (1x250W) PV2007-A1
6
86 | 173
A6V10430579_en--_b
6.9.3 Connect analog audio inputs and controls
The 'Power amplifier (1x250W)' PV2007-A1 provides one connector ('CH A') to
connect analog audio inputs and status outputs.
Fig. 64: PV2007-A1 analog audio input and status output connector
Analog audio input and status output connector - 'CH A'
Pin
Description
Remark
1
A IN 1 +
Channel A analog audio input 1 +
2
GND
Channel A GND reference to input 1
3
A IN 1 -
Channel A analog audio input 1 -
4
N/A
Do not use
5
N/A
Do not use
6
N/A
Do not use
7
230 V ok
Relay output AC 230 V ok, open: fault
8
230 V ok
Relay output AC 230 V ok, open: fault
9
CH A ok
Relay output channel A ok, open: fault
10
CH A ok
Relay output channel A ok, open: fault
11
24 V ok
Relay output DC 24 V ok, open: fault
12
24 V ok
Relay output DC 24 V ok, open: fault
Table 44: PV2007-A1 analog audio input and status output connector - 'CH A'
1 CH A 12