Mounting Instructions

Install internal components
System state indicator PT2004-A1 and PT2007-A1
6
92 | 173
A6V10430579_en--_b
6.12 System state indicator PT2004-A1 and PT2007-
A1
The 'System state indicator (19")' PT2004-A1 and 'System state indicator (door)'
PT2007-A1 are technically the same. Only the front panel is different.
The PT2004-A1 is designed to be mounted in a 19'' cabinet. The PT2007-A1 is
designed to be mounted in cabinet doors or control panels.
6.12.1 Installation
Connect the PT2004-A1 or PT2007-A1 24 V to a power supply with the 2-pole
connector 'CN1' and the inputs and output signals to a digital audio matrix with the
connector 'CN2'
Fig. 67: PT2004-A1 and PT2007-A1 connector overview
6.12.2 Connect DC 24 V power supply
The PT2004-A1 and PT2007-A1 provide one DC 24 V power supply connector
('CN1').
DC 24 V power supply connector - 'CN1'
Pin
Description
Remark
1
DC 24 V
-
2
DC 0 V
-
Table 51: PT2004-A1 and PT2007-A1 DC 24 V power supply connector - 'CN1'
Inputs and
Outputs
1
Power
DC 24 V
1
CN1
CN2