Configuration Instructions

Hardware specific configuration
'Zone Select Table – Regular Keypad'
7
A6V10429097_en--_e
147 | 219
7.3.3 Injected Sound
An injected sound is a short '*.wav' file in the flash of every device, which lasts no
longer than 4 s. This sound can be triggered by a 'PLAY SOUND' command.
By default, no audio file is injected.
Injecting a sound
1. Double-click on the 'Play Sound' button.
 The following dialog appears:
2. Click on the 'Inject sound' button.
3. Choose a '*.wav' audio file and confirm the prompt.
 The 'Metadata' dialog appears:
4. Click 'OK' to confirm.
 The audio file is written to the device's flash, together with the entered
metadata.
 The audio file can be played back, including via the local sound card.
 The metadata can be displayed.
7.4 'Zone Select Table – Regular Keypad'