Configuration Instructions

Appendix
Frequently asked questions
12
208 | 219
A6V10429097_en--_e
Consider enabling the option 'Disable checking number of members' 'SYSTEM
account'.
I can't see some or all my devices of my protected system.
Devices are filtered at a low level if there is a security issue, e.g., if devices in a
specific system have different security entries.
Log in as 'SYSTEM' and check that all devices are present. Run the check again if
necessary and correct the security issue via 'Extras' > 'System Protection'.
I can't open a specific configuration window due to the 'Aborted
(no RAM Settings available to edit)' warning.
Nearly all configuration data is organized in specialized 1 kb data blocks, which
were read from the hardware device during a System Scan. The number of these
requested data blocks depends on the device type at also its configuration. If, for
some reason, some of these blocks can't be read (e.g., due to an unstable
network), the configuration window can't be opened.
Station function 'Get SD-Card Directory' does not return all files
The number of files on the cards exceeds 32 (DSP issue). Use the command
'Show Dir' in the 'microSD Card' configuration window to get all files.