Configuration Instructions

Appendix
Solutions for dealing with error messages or unexpected system behavior
12
A6V10429097_en--_e
211 | 219
SystemError
Value
Remark
Type
BACKUPIN_FAULT
0x41
Back-up in supervision reports error on specific input
F
RUNNING_ON_BATT
0x42
The station is running on battery (Mains fault)
(valid since FW1.1B30)
F
STATION_FAULT
0x50
Detect a offline status of a required station
F
LOGGING_STATION_OF
FLINE
0x51
The errorlog station is offline
F
LOGGING_STATION_RE
BOOT
0x52
The logging station was rebooted
F
ERRTYPE_RELEASED_
ERR
0x80
An error released but another is pending
F
LOGGING_STATION_LO
GGING
0x81
Logging was switched on|off
(implemented since V1.1B9)
U
STATION_SELFTEST
0x82
Selftest executed (V1.2B13)
U
83..8F
Future unconditional entries
U
INPUT_CHANGED_GRP
1
0x90
Used to log I/O changes
Valid since FW1.2B13
P
..
0x91
P
..
0x92
P
INPUT_CHANGED_GRP
4
0x93
P
INPUT_STATE_GRP1
0x94
P
..
0x95
P
..
0x96
P
INPUT_STATE_GRP4
0x97
p
LOOP_STARTUP
0xB1
Loop entered startup mode
Valid since FW1.2B20
W
CRC_CHECK_FAILED
0xB2
W
ERRTYPE_UNDEFINED_
ERR
0xFE
an unknown/ undefined error is pending
UNUSED
0xFF
Mark an entry as not used (e.g after erase)
Table 5: System Errortypes
F
Faults: System relevant fault states (always logged)
W
Warnings, 'LogWarnings'
I
Information: System events caused by e.g., user/ext. controls, 'LogInfos'
P
Peripheral changes 'LogEvents/LogChanges'
U
Unconditional, always logged
12.4 Solutions for dealing with error messages or
unexpected system behavior
This section is a compilation of solutions for dealing with error messages or
unexpected system behavior.