Configuration Instructions
User interface
'System Lists'
4
A6V10429097_en--_e
31 | 219
4.3 'System Lists'
This section displays system-relevant settings and is split into several tabs, named
'Audio Feeds', 'Active Calls', 'Stations', 'Peripherals', and 'System'. If the 'Refresh'
button is activated, this updates the list once every second.
● Click on the switch, to toggle the refresh of the active
view.
● Press and hold <Ctrl> + <P> to print the active view.
4.3.1 System Lists: 'Audio Feeds'
Audio feeds correspond to network audio channels.
The 'Audio Feeds' tab contains all configured audio feeds. On the left side, a
summary is shown.
◈
Click on the 'Show Zones' checkbox to display configured outputs which are
using the network channel.
Missing Feed:
Network channel which is used by at least one audio zone (audio output) and
therefore should be present in the system.
Click on the 'Show Zones' checkbox to show all the zones which are using
missing feeds and all the zones which are using the currently selected audio feed.
Active Feed:
Is a network channel that is currently being fed into the network. The number
and name of the feed channel are shown in bold.
Charged Feed:
Is a network channel that is currently being fed in at an audio level of more than
-60 dB. In this case, the level is shown in bold.
Fig. 5: Audio Feeds
● Network audio channels are program channels or priority channels.
● Program channels have a network channel number <128.
● Priority channels have a network channel number ≥128.