Configuration Instructions
User interface
'System Lists'
4
A6V10429097_en--_e
35 | 219
4.3.4 System Lists: 'Peripherals'
The 'Peripherals' tab shows:
● Summary and statistics of all activated external ↑ UARTs
● All used logic inputs
● All used logic outputs
Fig. 9: Peripherals
'Used UARTs'
If the external UART interface is enabled, the station will be displayed in this
section, together with the activated protocol and RX/TX statistics.
'Used Logic Inputs (Connector)'
Displays detailed information about the station, function, state, and numbering of a
digital input being used. Events triggered by each function are displayed in real
time.
Examples:
● If a keypad key is triggered, the state of the affected key and the associated
LED will be displayed.
● Or, if a network audio channel is affected, the state and level of this feed is
updated periodically.
Use this information to determine the status of all used digital inputs.