Configuration Instructions
System configuration
Step by step guide to configure a new system
5
A6V10429097_en--_e
45 | 219
Peripherals and Interfaces
1. Set up the serial interface by selecting a protocol from the list, e.g., 'PACE-
Bus'.
2. Enable the RSL and specify the matrix that will log the errors.
'LineDetection' function
1. Configure the monitoring parameters.
2. Perform a LineDetection measurement for each line.
3. Enable the 'Maintenance' flag for faster response times.
4. Repeat the process until 'OK' is displayed for all lines.
Backup concept
◈
Enable the backup amplifier feature.
Tablet Designer and API control
1. Create a 'PACE-Net API' server.
2. Configure the external interfaces.