Configuration Instructions

System configuration
Using the PT2006 remote control panel
5
A6V10429097_en--_e
71 | 219
'MX Basic'
Mixer panel specific settings, not used with 'PACE-Net'
Fig. 38: 'CFG Common' mask
Button
Information
Top middle
(arrows)
Return to configuration selection menu
Top left / right
Move the cursor up / down
Bottom left / right
Change the selected value
1. Move the cursor as shown above ('device id') and choose a distinct number.
This number must be unique in the bus system which is connected to the
'Digital audio matrix (4/4/4)' device.
2. To return to the 'Configuration' mask, press the top middle button (arrows).
3. Now press the bottom right button ('EXIT'). The display will freeze for about
20 seconds and the message 'Waiting for BUS ID:X' will be displayed.
 The device is now fully configured.