Configuration Instructions

System configuration
Using keypad macros
5
A6V10429097_en--_e
93 | 219
Macro ID
Additional params
Description
Supported button modes
‘C’
asc(67)
0x43
Byte0: channelNo
Byte1: outputmask
Byte2-3: stationID
(0=SuppSelf)
MSB(B15) of station ID
used in Switch L>H mode:
Switch L>H: LED lights up
if chosen channel is active
Channel set to given value
'PRG-Kanal eines speziellen
Ausgangs ändern'
B15 used in combination in L-H
keymode to set channel to 1st L-H
transition, and reset channel(0) to next
L-H transition
Macro_Mode
'E'
asc(69)
0x45
Byte0 KeyIndex
Byte1/2: StationID
(0= SuppSelf (1))
EmuKey
'A button with the given index on the
specified station is pressed or
released'
Macro_Mode, TalkButton,
Zone
SelectPlaySound_SD
PlaySound_FLASH
'Talk2' Button
PushButton
Switch L>H (2)
Invert logic option
supported
‘l’
asc(108)
0x6C
Byte0: VarID
0=analog input value,
values>127 set the LED
1=digital input
2=digital output
3=station error state bit
4=activeWavFileNo(local
only)
5=keyState
Byte1:inp.Number/bitNo/wa
vNo DigIO/AnaIn: 1..x
(dep. on ID)
BitNumber of req.errorBit
Range: 1...32
WAVNo(0-255)0=any
channel keyIndex:
136...255
Byte2-3: stationID
(0=SuppSelf)
MSB(b15) of station ID
used to set the yellow LED
instead of the green one
ledStateInput
'Grüne Zustands-LED nach jeweiligem
Eingang entsprechend einstellen'
Macro_Mode
SID=0=SuppSelf 1
'L'
asc(76)
0x4C
Byte0: VarID
0=AnyLED
1=redLED
2=greenLED
3=yell/orange
Byte1: inputNumber
LED: 0…255
Byte2-3: stationID
(0=SupportSelf (1))
LEDState
'Retrieve the LEDState from a specific
input'
Macro_Mode
V1.1B33 / 0=AnyLED: