Configuration Instructions

Configuration pages – Overview
'Basic Station Configuration'
6
A6V10429097_en--_e
99 | 219
6.1.1 Basic Station Info
'System Name'
'System Name' is the designation of the project or system being configured.
You can change the 'System Name':
● If the icon is shown grayed out, you have no write permissions. Check
whether your current account has the correct rights to edit this page.
● Click the icon to open a dropdown menu showing all known system
names.
● Click the icon again to create a new system, where you can enter any
text.
'Station Name'
You can select this name as you choose, but 'Station Name' should correspond to
a device name as shown in a single-line diagram.
'Location'
Optional, customer-specific text to identify a module.
'additional text'
Optional text to store additional information of a module.
'Grouping data'
Reserved for future use.
To change a system name, click 'Extras' > 'System Protection' > 'Protection of
Name' > 'Change the system name'.