Installation Instructions

Install internal components

System operating unit PT1001-A1

66 | 122

A6V11899867_en--_a

6 Install internal components

The internal components are mounted and installed in the Cerberus PACE

Compact cabinet or on the front door.

6.1 System operating unit PT1001-A1

The 'System operating unit' PT1001-A1 is designed to be mounted on a front door

of a Cerberus PACE Compact cabinet.

The provided cables are used to connect the PT1001-A1.

6.1.1 Mounting

The 'System operating unit' PT1001-A1 is designed to be mounted on a front door

of a Cerberus PACE Compact cabinet in place of the mounted blind plate.

Fig. 37: PT1001-A1 unmount front door blind plate

1. Take off the earth connection at the blind plate of the Cerberus PACE Compact

cabinet font door.

2. Unscrew the 8 screws of the blind plate.

3. Remove the blind plate.

4. Insert the PT1001-A1.

5. Use the 8 screws to mount the PT1001-A1.

6. Mount earth connections on the top and bottom of the PT1001-A1 to the

cabinet door.

7. Print and insert inscription stripes.

8. Configure and install the PT1001-A1.