Configuration Instructions
User interface
'System Lists'
4
A6V10429097_en--_e
37 | 219
4.3.6 System Lists: 'Compare with Snapshot'
Via this tab the user can verify if settings of a system have been changed.
To use this tab, you need to select a single system, load and compare an actual
snapshot via the 'System' > 'Compare with Snapshot' menu.
Fig. 11: Compare with Snapshot
Fig. 12: Loading a snapshot
You may have to define a filter under 'System Name' beforehand. Newer elements
are marked as bold. Dynamic hints show configuration changes. You can compare
two snapshots by loading a snapshot with <Ctrl> + <O>.
If the 'Check StationInfo' checkbox is unchecked, the two systems are compared
depending only on the regular configuration pages. The latest change is shown.