Configuration Instructions
System configuration
Setup the supervision extension card
5
A6V10429097_en--_e
55 | 219
5.5.3 Take live measurements of the system
It is possible to display additional information relating to the 'LineDetection' feature.
To gain access to these features, open the 'Peripherals and Supervision' page and
right-click. Then click on 'get struct: Error logging List' and select 'Linedetection
Statistic'. Next do a left mouse button click on the button and the interface opens.
Saves a screenshot of the local machine. Pressing the <Ctrl> button and left-
clicking opens the directory in Windows Explorer.
Enables a periodic request for statistics. Right-click to open a dialog for selecting
various intervals.
Click on the symbol to toggle the display of values. The dropdown symbol
displays the field for selecting different measurement types.
'Line Detection (All):'
retrieve the last values of a measurement cycle
'Measure Impedance + Line Detection (Chx):'
Start an impedance measurement (200 Hz…20 kHz) on the selected line
'Search EOL3 + Line Detection (Chx):'
Start an EOL3 sweep on the selected line
For switching between text and display mode
Link to other statistic windows. If it is enabled, all changes will affect other visible
'LineDetection' statistic windows.
5.5.3.1 Calling a measurement cycle
● Select 'Line Detection (ALL): Get last values for all lines' from the measurement
type selection field.
Fig. 23: Values of the last measurement cycle