Brochure

6
Traditional control valve + balance valve
Nearly twice as much space required
6-inch Globe Valve + 6-inch Circuit Setter
Smaller install footprint
No matter how complicated the pipe network, Siemens PICVs are the right fit.
Siemens PICVs combine a control valve and a balancing valve functionality into a single device. The traditional control
valve and balancing valve require almost twice as much space.
To properly pipe this configuration, almost twice the amount of space is needed. Also, considering that a flanged control
valve and the balancing valve each are about 200 pounds, there is double the weight which would require additional
piping support.
The Siemens PICV helps achieve a smaller footprint, for an easier install. This solution allows for faster commissioning,
less labor and less material costs as well as helping meet the goals of fewer leak points, no callbacks and longer reliability.
Siemens PICV
Combined control valve
& balance valve
6-inch PICV
18”
Min. 34.5”
Easy installation
• No special tools • No programming tools • Field adjustable by hand
Flanged valve
Threaded valve
With a PICV solution, there are fewer devices
that need to be piped into the coil hookup,
which leads to fewer potential leak paths. With
fewer connections and leak paths, there are
lower risks for callbacks and repairs, which is
another advantage that is possible with PICVs.
Fewest leak points
Siemens PICV require less
connections and therefore
have fewer leaks.