User Manual

ManualsBrandsSiemens ManualsExtinguishing - Non-electrical Disable Devices3 way blocking device DN 6 PN360 (pilot line)

1/5

Building Technologies 12-03-912 E

Fire Safety & Security Products

Blocking device ENGLISH

12-03-912

PED-category: SEP

2 way blocking device

PN360 BKH DN06

PLB-BKH 360 06

Index Description Date

Fluid-group: 2 01.09.06

Product line

Sinorix ™

a VdS & CE adding 01.11.06

b blocking spec. update 01.10.13

CX ref. no

583606

c Adaptation 3- to 2-way 20.04.20

G305004 0786CPR30045

SAP

S54476-B77-A5

2014/68/EU, EN12094-6

Technical data

OEM type 040-004-145 / art 2359004

max operating pressure 360 bar

operating pressure 10bar – 360bar

burst pressure (valve body only) 1080 bar

agent IG-01, IG-55, IG-100, IG-541, CO2, Fk-5-1-12, HFC 227

actuation manual lever

G1 / G2 L 6

weight 1.8 kg

limit switch Box Rotech 24 V DC, IP 66, 2 switches

fitting position independent

direction of flow Arrow marked on valve body

Operation: 0° / isolated: 90°

locking bolting in position “open” and “blocked”

lockable in position “open” and “blocked”

able to take off key in position “open” and “blocked”

padlock supplied with 2 keys

all blocking devices supplied with identical key

material

housing steel galvanized, (Cr(VI) free)

shaft stainless steel

ball stainless steel

Summary of content (5 pages)

PAGE 1
Blocking device ENGLISH 12-03-912 PED-category: SEP Fluid-group: 2 Product line Sinorix ™ CX ref. no 583606 SAP S54476-B77-A5 2 way blocking device PN360 BKH DN06 PLB-BKH 360 06 Index Description a b c VdS & CE adding blocking spec. update Adaptation 3- to 2-way 2014/68/EU, EN12094-6 G305004 Date 01.09.06 01.11.06 01.10.13 20.04.
PAGE 2
Usage Blocking device for control lines in Sinorix ™ inert gas extinguishant systems and chemical Sinorix ™ extinguishant systems with following nominal filling pressures: IG IG CO2 H20 Gas 200 bar (@ 15° C) 300 bar (@ 15° C) 58.
PAGE 3
Installation guidelines Warning! Do not disassemble valve drives and limit switch boxes. Valves could sustain damage or their function is impeded and they do not actuator. Tubes must be laid out without tension. Fit selector valves to wall constructions only and not to machine parts Assembly of the valves 1. Set the blocking valves to the open position (open and close the ball valves by rotating the selector shaft 90°). 2. Clean the tubes and if required remove ridges.
PAGE 4
Procedure 1. Open the limit switch box. 2. Pull the cables through the screwed cable glands. 3. Connect the terminals in accordance with the technical documentation and the interface diagram of the CX boxes. 4. Close the limit switch box and tighten the screwed cable glands.
PAGE 5
Maintenace guidelines Warning! Removal, replacement or repair of the valve or actuator seals by any party other than Siemens is prohibited. To ensure that a selector valve will remain functional following long periods of inactivity, it must be operated pneumatically at least every six months. Isolation valves must be manually operated at least every six months. Maintenance requirements Valves are to be subject to routine maintenance and inspection. 1.