User Manual

ManualsBrandsSiemens ManualsACRD EquipmentBatiBUS Node

CE1N3683en

16.08.2000

6LHPHQV%XLOGLQJ7HFKQRORJLHV

/DQGLV6WDHID'LYLVLRQ





%DWL%861RGH

31%

FOR ACC86.X / RCE86.X- VISONIK CONNECTION

6\VWHPRYHUYLHZ

VISONIK 400/4000

PRV2.0 PRV PRV PRV

PNB5.0 PNE

BatiBUS

ACC86.x

RCE86.x

Building Level

Field Level

The PNB is an interface between the BatiBUS and the PRV2.0.

− PNB 5.0 : only for RCE86.xx/509 and ACC86.x units.

Software version must be 14 or higher.

(These units are named ACC86 in the following text)

− PNB 2.0 : for older versions

Summary of content (4 pages)

PAGE 1
31% %DWL%86 1RGH FOR ACC86.X / RCE86.X- VISONIK CONNECTION 6\VWHP RYHUYLHZ VISONIK 400/4000 Building Level PRV2.0 PRV PRV PRV PNB5.0 PNE Field Level BatiBUS ACC86.x RCE86.x The PNB is an interface between the BatiBUS and the PRV2.0. − PNB 5.0 : only for RCE86.xx/509 and ACC86.x units. Software version must be 14 or higher. (These units are named ACC86 in the following text) − PNB 2.0 : CE1N3683en 16.08.
PAGE 2
6\VWHP FDSDFLW\ • A max. of 60 ACC86 controllers per BatiBUS can be addressed and controlled by one PRV2.0. • he Controller address range is 0 to 200, of which the PRV2.0 can address the range from 1 to 200. • In the PRV2, there can be up to 24 groups of controllers with max. 16 controllers per group. • Additionally, up to 30 master / slave configurations with max. 10 controllers are possible )XQFWLRQV • Mapping the ACC86 values A range of ACC86 values are mapped to PRV2.
PAGE 3
Each ACC86 transmits the electrical energy consumed and offers possibilities of influencing energy consumption. Display Consumed Energy per controller and per group Electrical output limit Authorisation of electric air heater battery Command Electrical output limit Authorisation of electric air heater battery • Supervision of the communication The PNB supervises the communication between the PNB and the different ACC86, and reports its status to the PRV2.0.
PAGE 4
PNB protection Cable between PRV and PNB Regulator load (C) Capacitance (DS) PTC resistor 200mA max. 1.5 m 1mA C=2 DS=3.3 &RQILJXUDWLRQ ZRUN QHHGHG A COLBAS Task in the PRV2.0 is used for the project specific information: • Which ACC86 controllers are connected • Definition of the groups • Definition of master / slave $FFHVVRULHV Name Type reference Data sheet Power supply for BatiBUS 31( 8943 &RQQHFWLRQ GLDJUDP BatiBUS ACC86.x RCE86.x + + M W1 M W1 Phoenix MSTB2 PNE PNB5.0 PRV2.