Mounting Instructions

Siemens Smart Infrastructure A5W90005069 AD A6V11402750_----_d 2020-10-10 1 / 2

en Mounting instructions Climatix

range

POL467.75/STD

POL468.65/STD

POL468.85/STD

zh 安装指南 Climatix

系列

Clearance requirement / 间隙要求

Dimensions in mm / 尺寸（毫米）

Mounting / 安装

POL46

/STD

POL468.

/STD

POL468.

5/STD

POL467.75/STD

POL468.

STD

POL468.

5/STD

①

Seven screws (GB818-M3.5 × 8) and seven washers (Ø4) /

7 个螺钉 (GB818-M3.5 × 8) 和 7 个垫圈 (Ø4)

Seven screws (GB818-M3.5 × 8) and seven washers (Ø4) /

7 个螺钉 (GB818-M3.5 × 8) 和 7 个垫圈 (Ø4)

②

Seven standoffs M3.5 × L (L > 10 mm) /

7 个螺柱 M3.5 × L (L > 10 mm)

Seven standoffs M3.5×L (L > 10 mm) /

7 个螺柱 M3.5×L (L > 10 mm)

Note: The mounting screws, insulation washers and standoffs are not included in the delivery package.

注意：包装中不包含安装螺钉、绝缘垫圈和螺柱。

WARNING / 警告

Always mount the controller with insulation washers.

控制器安装时必须带上绝缘垫圈。

Accidental fall-out of metallic screws may cause a short circuit.

金属螺钉脱落可能会引起短路。

A5W90005069

PAGE 1
A5W90005069 ClimatixTM range ClimatixTM 系列 en Mounting instructions zh 安装指南 POL467.75/STD POL468.65/STD POL468.85/STD Clearance requirement / 间隙要求 Dimensions in mm / 尺寸（毫米） Mounting / 安装 POL467.75/STD ① ② POL468.65/STD, POL468.85/STD POL467.75/STD Seven screws (GB818-M3.5 × 8) and seven washers (Ø4) / 7 个螺钉 (GB818-M3.5 × 8) 和 7 个垫圈 (Ø4) POL468.65/STD, POL468.85/STD Seven screws (GB818-M3.5 × 8) and seven washers (Ø4) / 7 个螺钉 (GB818-M3.5 × 8) 和 7 个垫圈 (Ø4) Seven standoffs M3.
PAGE 2
Dimensions (mm) / 尺寸（毫米） POL467.75/STD POL468.65/STD, POL468.85/STD List of connectors / 端子示例 It is highly recommended that, the Climatix POL467.75/STD, POL468.65/STD and POL468.85/STD controllers use Phoenix connectors certificated by Siemens. The connectors are listed below and can be ordered from Siemens. 强烈建议 Climatix POL467.75/STD、POL468.65/STD 和 POL468.