User Manual

14
Siemens
A6V11417931_en--_b
Smart Infrastructure
2020-07-08
Power supply for field sensors
Reference potential
Terminals ┴
Connection
Short-circuit protected
NOTICE! The drive’s capacitive
load of DC output 24 V and HMI
24 V is less than 100 μF.
Digital outputs
Q13, Q14, Q23, Q24 (T7)
Q33, Q34 (T14)
Digital relay outputs
Contact
Monostable, NO (normally open) contacts, SPST (single pole, single
throw)
Switching voltage
AC 24...230 V (-20 % / +10 %)
Rated current (res./ ind.)
AC 0.02...3 A (res.) / 2 A (ind. cosφ=0.6)
Switch on current
Max. 15 A < 1 s
Endurance
150,000 cycles at AC 250 V, 3 A (res.)
Max. external supply line fusing
6.3 A slow wire fuse or circuit breaker
Triac outputs
Y1 (T19)
Onboard Triac output
Switching voltage
AC 24...230 V (-20% / +10%)
Nominal current (res./ ind.)
With heat sink: AC 0.05….1 A (cosφ=1)
Switch on current
Max. 10 A < 1 s