Configuration Instructions

Configuration pages – Overview
'Peripherals and Supervision'
6
130 | 219
A6V10429097_en--_e
Station ID
This station will be addressed by the commands. Currently only the local station ID
is supported.
Audio Outputs
These Audio outputs will be used for the remote control. If at least two outputs are
selected, you can enable the 'Cycle through outputs' option.
Cycle through outputs
Per default all enabled outputs will be controlled in parallel. If the cycle through
outputs is enabled, the user is only able to control a single output from the
“Outputs” configured. The only view which supports this mode is the
'Vol and Ch +/-' interface.
Allowed Network Channels
If the user switches through the audio channels, this list will be taken to choose
which program is next to play. To modify this list, use the buttons
'Add all Channels', 'Delete selected', and 'Delete all'.