Configuration Instructions

System configuration

Using keypad macros

90 | 219

A6V10429097_en--_e

5.18 Using keypad macros

You can use macros to trigger specific events when specific buttons on a call

station keypad are pressed or released. The 'Use_Macro' flag has to be enabled

for the corresponding button.

To enable the execution of a macro

1. Open the 'Digital Input Mode (Keypad)' or 'Virtual Keypad' of a station.

2. Select a button and right-click with the mouse.

3. Choose 'Flags' -> 'USE_MACRO'.

There is no need to enter the macros in pure text form, use the Macro definition

dialog to simplify the configuration:

Configuring a keypad macro

1. Open the 'Digital Input Mode (Keypad)' or 'Virtual Keypad' of a station.

2. Right-click on the required button.

3. Select 'Flags', then 'USE_MACRO'.

4. Specify the macro in the 'Macro Definitions' dialog.

See chapter 'Play audio in zones using digital inputs [➙ 67]'

Fig. 54: Opening the 'Macro Definitions' dialog

To define a macro

1. Open the 'Macro definitions' dialog.

2. Place the cursor in the 'Normal Mode' -> 'Press' text field.

3. Choose a macro from the dropdown field and specify the parameters

4. Click 'Add' to apply the macro.