Mounting Instructions

Install internal components
Power amplifier (2x250W) PV2001-A1
6
A6V10430579_en--_b
75 | 173
6.6.5 Use PV2001-A1 in bridged mode 500 W
The 'Power amplifier (2x250W)' PV2001-A1 can be used in the bridged mode with
an output power of 500 W.
● Analog audio input:
Bridge in parallel the channel A with channel B analog audio inputs 1 ('A IN 1'
AND 'B IN 1')
If the analog audio input shall be switched between input 1 and input 2, then
also
– bridge in parallel the channel A with channel B analog audio inputs 2 ('A IN
2' AND 'B IN 2');
– bridge in parallel the channel A switch IN 2 with channel B switch IN 2.
● 100 V output:
Connect in series the 'Out A' 50 V with 'Out B' 50 V
● Fault reporting:
Connect in series the 'CH A OK' relay with 'CH B OK' relay.
NOTICE
Make sure that only the 50 V outputs are used in the bridged mode
It is prohibited to use the 100 V outputs in the bridged mode.