User Manual

AMEV
Mechanical and Electrical Engineering Working
Party of National, Regional and Local Authorities BACnet CERTIFICATION BODY
AMEV attestation for certified BACnet devices
1. The following BACnet device is certified as per DIN EN ISO 16484-5:
Supplier Siemens Schweiz AG
Product name DESIGO PX
Product model number PXC001-E.D MODBUS
Standard device profile B-BC BACnet protocol vers. / rev. 1.12
Firmware revision FW=V6.00.024 Modbus / SBS=11.01 / FLI=06.00 / BBI=13.06
Data link layer options BACnet IP (Annex J) BACnet over LonTalk
BACnet MS/TP master BACnet MS/TP slave
MS/TP baud rates:
Static device binding Yes (for MS/TP only)
Networking options BBMD Reg. by Foreign Devices
Router, medium:
Character set UTF-8
Reporting options Intrinsic reporting Algorithmic reporting
2. The device supports BACnet functions as per AMEV profile:
AMEV profile AS-A (Automation station, base version) As of: .............
AMEV profile AS-B (Automation station, extended version) As of: V 1.2 29.01.2014
AMEV profile ……………………………………………………….. As of: .............
3. Basis for AMEV attestation:
Test report of test lab MBS dated 26.08.2015 number VG 2015_10936_2
AMEV recommendation BACnet V 1.2 As of: 29.01.2014 (see www.amev-online.de)
4. The AMEV attestation is only valid in combination with the certificate:
Certificate number BTL-30054 (see http://www.bacnetinternational.net/btl)
Stuttgart, 25.04.2017
…………………………………………………... ……………….…………………….
(AMEV chairman BACnet) (BACnet certification body)
Dr.-Ing. Bernhard Hall
Vermögen und Bau Baden-Württemberg
Rotebühlplatz 30
70195 Stuttgart
Telefon [phone]
Email [e-mail]