Installation Instructions

Installation Instructions
Document No. 553-170
November 03, 2017
PXC Compact Series
Extended Temperature Range Option
Item Number 553-170(EA) Page 1 of 4
Product Description
The PXC Compact Series communicates with other field
panels or workstations on a peer-to-peer Automation
Level Network (ALN). The following communication
options are supported:
 Native BACnet/IP communications over
10/100 MB Ethernet networks
 Native BACnet MS/TP on RS-485
 Ethernet TCP/IP ALN
 RS-485 ALN or FLN
The PXC Compact is available in 16- or 24-point
versions with optional support for FLN devices (requires
additional license and PXC Compact model with both an
Ethernet and an RS-485 port). Selected models also
support ability to reside as a P1 FLN device.
For information on the PXC Compact Series
with a standard temperature range for use in
controlled spaces, see the PXC Compact
Series Installation Instructions (553-168).
Product Numbers
PXC16.2-ER.A
PXC Compact, 16 point, BACnet/IP
ALN, rooftop option
PXC16.2-ERF.A
PXC Compact, 16 point, BACnet/IP
ALN, rooftop option, RS-485 FLN
supported with additional license
PXC24.2-ER.A
PXC Compact, 24 point, BACnet/IP
ALN, rooftop option
PXC24.2-ERF.A
PXC Compact, 24 point, BACnet/IP
ALN, rooftop option, RS-485 FLN
supported with additional license
PXC24.2-PER.A
PXC Compact, 24 point, Ethernet/IP
ALN, rooftop option
PXC24.2-PERF.A
PXC Compact, 24 point, Ethernet/IP or
RS-485 ALN, rooftop option, RS-485
FLN supported with additional license
PXC24.2-PR.A
PXC Compact, 24 point, RS-485 ALN,
rooftop option
PXA-DIN16KIT
Accessory kit with four 16" (406 mm)
DIN rails
Warning/Caution Notations
WARNING:
Personal injury or property damage
may occur if you do not follow a
procedure as specified.
CAUTION:
Equipment damage or loss of data
may occur if you do not follow a
procedure as specified.
Required Tools and Materials
 Wire stripper/side cutter
 Small flat-blade screwdriver
 Phillips screwdriver
 Electric drill and Phillips driver bit
 Level
 Tape measure
 Digital multimeter (DMM)
 Black marker
 Masonry drill bit (to mount on concrete or
masonry)
 Four wall anchors (to mount on concrete or
masonry)
 Optional DIN rail (1.38" W × 0.276" H × 0.04" D
(35 mm W × 7 mm H × 1 mm D))
Included Materials
The following screws are included for mounting the PXC
Compact without a DIN rail:
 Four No. 8-18 × 3/8” self-tapping Phillips screws
 Four No. 8-18 × 3/4” self-drilling Phillips screws
 Two No. 8-18 × 1-3/4” self-drilling Phillips screws
Expected Installation Time
20 minutes