Environmental Declaration

EPD - Type II
Based on ISO 14021
Building Parts
QAM1612.020 Tmp.sensor duct PT1k 0.2m
QAM1630.020 Tmp.sensor duct NTC10k 0.2m
QAE1630.010 Tmp.sens.immers.NTC10k 0.1m
QAE1612.010 M3 ITS
Product line, product range
Beijing Siemens Cerberus Electronics Ltd
No.1 Fengzhi Dong Lu, Xi Bei Wang, Haidian District
100094, Beijing, China
Management System since by
ISO 9001 (Quality) 06.01.2001 LPCB
ISO 14001 (Environment) 05.07.2005 SGS
OHSAS 18001 (OH&S) 12.12.2011 SGS
Typical energy consumption 23kWh/a
Fire load 2MJ
20-PAP Corrugated fibreboard Folded Box and Inlay 47 … 68g
22-PAP Paper mounting instruction 5g
Total weight of device 67 … 80g
The total weight of a device may deviate from the total of the weights of all individual components due to rounding.
PC; low-halogen top and base cover, flange 44 … 51g
Steel screw, spring metal variant
stainless steel, glue, sensor, cabel tube 11 … 21g
FR4; low-halogen; solder SnPb PCBA 4g
*Variant parts list
[g]
Steel
Comments
QAM1630.020
84
QAE1612.010QAE1630.010
4
QAM1612.020
8
Materials
Packaging
Others
The device is classified as waste electronic equipment in terms of the European Directive 2012/19/EU (WEEE) and
must not be disposed of as unsorted municipal waste. Regarding disposal, use the systems setup for collecting
electronic waste.
Observe all local and applicable laws.
Disposal
PCBAs (Printed Circuit Board
assembled)
EU-directive 2011/65/EU (RoHS)
sensor
Environmental
Product Declaration
Type of equipment /
Product No.
Product
Environmentally compatible
product design
Process control
Product responsibility of Siemens covers the entire product life cycle. Siemens already assesses, avoids and
minimizes the environmental impact of its products with respect to production, procurement, sales, use, services and
disposal during the product and process planning phases by complying with Siemens EP Standard (former SN
36350) "Specifications on Environmentally Compatible Product and System Design".
Metals
Product use
Plastics
Restricted Page 1/2