User Manual

ManualsBrandsSiemens ManualsAir ConditioningQAM21

CE1N1761en

2018-05-24

Building Technologies

761

Mounting flange AQM63.0 QAM2110.040, QAM2120.040 QAM2120.200, QAM2120.600

Symaro™

Duct Temperature Sensors

QAM21...

Passive sensors for acquiring the air temperature in air ducts.

Use

The duct temperature sensors are for use in ventilation and air conditioning plants as:

· Supply or extract air temperature sensors

· Limit sensors, e.g. for minimum limitation of the supply air temperature

· Reference sensors, e.g. for shifting the room temperature as a function of the out-

side temperature

· Measuring sensors, e.g. for measured value indication or for connection to a building

automation and control system

Type summary

Type reference Probe length Mounting clamps Sensing element

QAM2110.040 0,4 m no Pt 100

QAM2112.040 0,4 m no Pt 1000

QAM2112.200 2,0 m 4 pcs. Pt 1000

QAM2120.040 0,4 m no LG-Ni 1000

QAM2120.200 2,0 m 4 pcs. LG-Ni 1000

QAM2120.600 6,0 m 6 pcs LG-Ni 1000

QAM2130.040 0,4 m no NTC 10k

1761P02

1761P03

1761P01

Summary of content (6 pages)

PAGE 1
Mounting flange AQM63.0 QAM2110.040, QAM2120.040 1761P02 1761P01 1761P03 1 761 QAM2120.200, QAM2120.600 Symaro™ Duct Temperature Sensors QAM21... Passive sensors for acquiring the air temperature in air ducts. Use The duct temperature sensors are for use in ventilation and air conditioning plants as: · Supply or extract air temperature sensors · Limit sensors, e.g. for minimum limitation of the supply air temperature · Reference sensors, e.g.
PAGE 2
Accessories (Spare parts) Name Type reference Capillary tube clamb for the QAM2120.200 and QAM2120.600 (6 pieces) AQM63.3 Monting flange AQM63.0 Ordering and delivery When ordering, please give name and type reference, e.g.: Duct temperature sensor QAM2120.040 The sensor is supplied complete with mounting flange AQM63.0 and, if required, mounting clamps AQM63.3. Equipment combinations All systems or devices capable of acquiring and handling the sensor’s passive output signal.
PAGE 3
Pt 1000 (class B) Characteristic: Accuracy: NTC 10k Characteristic: Accuracy: Legend R J DJ Resistance value in Ohm Temperature in degrees Celsius Temperature differential in Kelvin Mechanical design The duct temperature sensor consists of the following components: · Two-sectional plastic housing comprised of base with connection terminals and removable cover (snap-on design) · Fully active, flexible probe with sensing element which acquires the average temperature The connection terminals can be a
PAGE 4
Mounting notes Mounting location · For supply air temperature control: Downstream from the fan, if the fan is located after the last air handling unit. Otherwise, after the last air handling unit with a minimum distance of 0.
PAGE 5
Technical data Functional data Degree of protection Electrical connections Directives and Standards Environmental conditions Materials and colors Weight Operating range - 40...+ 80 °C for NTC type - 50...+ 80 °C other types Sensing element refer to "Type summary“ Probe Length Min.
PAGE 6
Dimensions Typ L1 L2 max. min. QAM2130.040 400 97 37 QAM2110.040 400 97 37 QAM2120.040 400 97 37 QAM2112.040 400 97 37 QAM2112.200 2000 97 37 QAM2120.200 2000 97 37 QAM2120.600 6000 97 37 Drilling plan Dimensions in mm Issued by: Siemens Switzerland Ltd. Building Technologies Division International Headquarters Theilerstrasse 1a CH-6300 Zug Tel. +41 58 724 2424 www.siemens.