User Manual

116 / 134
Siemens Synco™ living CE1C2740en
Building Technologies Function settings 13.12.2010
Operating hours
Shows the number of operating hours on the meter. If a pulse input of the
consumption data interface WRI982 is used, the totaled number of operating
hours of the WRI982 are displayed here.
Main menu > Consumption data > … > Operating hours:
ID number
Shows the ID of the meter.
Main menu > Consumption data > … > Ident number:
Metering medium
Shows the medium measured by the meter.
Main menu > Consumption data > … > Metering medium:
Allocation
Shows the type of allocation for the meter (Apartment/General).
Main menu > Consumption data > … > Allocation:
Meter replacement
Shows if the meter was replaced (Yes/No).
Main menu > Consumption data > … > Meter replacement:
Initial commissioning sets the meter replacement information to "Yes"
and must thus be set to "No" after commissioning is complete or after
the meter has been replaced.
The current meter status is sent with value "0" via S-mode while "Me-
ter replacement" is set to "Yes".
Time of day/date
Start/end of daylight saving time
The change from daylight saving to standard time and vice versa is automatic.
The earliest changeover date can be adjusted if the relevant standards
change.
As a result of the dates set for the change from standard to daylight saving
time, or vice versa, the time of day on the first Sunday after that date is ad-