User Manual

59 / 124
Siemens Synco™ living CE1C2707en
Building Technologies Commissioning the system 23.08.2008
If you press the channel selection button again, the channel group selection is
reduced by one channel (e.g. from Q1..Q3 to Q1..Q2, etc.).
When you reach the channel group size required for the desired function,
press the binding button on the multi-controller. The LEDs light up green.
When it starts blinking, you can release the binding button.
After successful binding, the multi-controller is restarted.
Now, the multi-controller is ready again for the connection of another channel
or channel group.
Connect cooling release outputs
After having stated under “Extra configuration > Rooms > Room X“ the rooms
that have a cooling release output, you can connect the respective cooling
release output for each room.
Main menu > Commissioning > RF connections
> Cooling release output > Room X > Connect device:
Confirm subentry “Connect device“ by pressing the Menu/ok button. To make
the connection, you are then prompted to press the binding button on the
device to be connected.
Connect a channel on the heating circuit controller / multi-controller
Use the channel selection button (CH) on the heating circuit controller or multi-
controller to select a universal relay output Qx. The LED of the selected chan-
nel blinks. If the selected channel is not yet connected, the binding LED starts
flashing.
Now, press the binding button on the heating circuit controller or multi-
controller. The LED lights up green. When it starts blinking, you can release
the binding button.
A successful connection appears on the display of the central apartment unit
and confirmed with a beep.
Close the binding process by pressing the Menu/ok button.
Connect RF adapter plugs KRF960 and KRF961
If the RF adapter plug is not yet connected, the binding LED flashes.
Now, press the button on the RF adapter plug. The LED lights up perma-
nently. When it starts blinking, you can release the button.
A successful connection appears on the display of the central apartment unit
and confirmed with a beep.
Close the binding process by pressing the Menu/ok button.