User Manual

71 / 124

Siemens Synco™ living CE1C2707en

Building Technologies Commissioning the system 23.08.2008

Connect input for summer operation

Inform the central apartment unit that you want to use universal input B of a

heating circuit controller or a universal input Xx of a multi-controller for con-

necting a summer operation contact:

Main menu > Commissioning > RF connections

> Inputs > Summer operation > Connect device:

Confirm subentry “Connect device“ with the Menu/ok button. To make the

connection, you are prompted to press the binding button on the device to be

connected.

Use the channel selection button (CH) to select universal input B of the heat-

ing circuit controller or a universal input Xx of the multi-controller. The LED of

the selected channel blinks. If the selected channel is not yet connected, the

binding LED flashes.

Now, press the binding button on the heating circuit controller or multi-

controller. The LED lights up green. When it starts blinking, you can release

the binding button.

A successful connection appears on the display of the central apartment unit

and confirmed with a beep. Close the binding process by pressing the

Menu/ok button.

Connect input for heating / cooling changeover

Inform the central apartment unit that you want to use a universal input B of a

heating circuit controller or a universal input Xx of a multi-controller for con-

necting a heating / cooling changeover contact:

Main menu > Commissioning > RF connections > Inputs

> H/C changeover > Connect device:

Confirm subentry “Connect device“ by pressing the Menu/ok button. To make

the connection, you are prompted to press the binding button on the device to

be connected.