User Manual

42 / 46
Siemens Wall-mounted sensors and room operator units for KNX/ETS and KNX/ACS CM2N1602en_06
Building Technologies ETS engineering 2019-04-08
5.6 Examples for the operation of touch keys
and display elements
In RTS, these functions are created as follows:
In the device view,
• activate or deactivate functions
• modify the default values if required
The objects that are now visible, must be connected to group addresses.
Key 1 Toggle the display between outdoor and indoor temperature
Keys 2 and 6 Room temperature setpoint adjustment (absolute)
Keys 3, 4 and 5 No function (no arrow symbols are displayed)
Key 7 Toggle the room operating mode (in Auto mode, the present operating mode is
displayed)
Key 8 Presence key, or Comfort extension
Key 1 No function, as only room temperature is displayed
Keys 2 and 6 Room temperature setpoint adjustment (relative)
Keys 3 and 7 Manual adjustment of fan speed
Key 4 Toggle the display pages between temperature, humidity, and CO
2
Keys 5 and 8 No function
Temperature and room
operating modes
Temperature,
fan control and
navigation