Environmental Declaration

ManualsBrandsSiemens ManualsThermostats (temperature controller with sensor)Mounting instructions for RDF280.V, RDF280.V/VS, RDF280.V/VG

EPD - Type II

Based on ISO 14021

RDF280.V VRF HMI modbus

RDF280.V/VG VRF HMI modbus

RDF280.V/VS VRF HMI modbus

RDF270.V Fresh Air Controller

RDF270.V/VG Fresh Air Controller

RDF270.V/VS Fresh Air Controller

RDD210.V Heating Room Thermostat

RDD210.V/VG Heating Room Thermostat

RDD210.V/VS Heating Room Thermostat

Product line, product range

BSCE

1, Fengzhi East Road, Xibeiwang, Haidian District

100094, BEIJING / China

Management System since by

ISO 9001 (Quality) 06.01.2001 LPCB

ISO 14001 (Environment) 05.07.2005 SGS

OHSAS 18001 (OH&S) 12.12.2011 SGS

Typical energy consumption variant *) see below

Maintenance

Fire protection according to

Fire load 3MJ

22-PAP Paper LABEL FOR WHITE BOX,CARTON 1g

22-PAP Paper INSTALLATION/OPERATION GUIDE,VRF,RDF280 6g

22-PAP Paper LABEL,PRODUCT DATE & DMC CODE,Blank 1g

4-LDPE Low density polyethylene PACKING,POLYBAG,WITHLOCK 1g

4-LDPE Low density polyethylene PE Polybag 4g

Packaging

Environmentally compatible

product design

Process control

Product responsibility of Siemens covers the entire product life cycle. Siemens already assesses, avoids and minimizes the

environmental impact of its products with respect to production, procurement, sales, use, services and disposal during the

product and process planning phases by complying with Siemens EP Standard (former SN 36350) "Specifications on

Environmentally Compatible Product and System Design".

Product use

Risk of fire

Product

Environmental

Product Declaration

Type of equipment /

Product No.

Not necessary

EN 60730

Restricted Page 1/6

Summary of content (6 pages)

PAGE 1
EPD - Type II Based on ISO 14021 Environmental Product Declaration Type of equipment / Product No. Product RDF280.V VRF HMI modbus RDF280.V/VG VRF HMI modbus RDF280.V/VS VRF HMI modbus RDF270.V Fresh Air Controller RDF270.V/VG Fresh Air Controller RDF270.V/VS Fresh Air Controller RDD210.V Heating Room Thermostat RDD210.V/VG Heating Room Thermostat RDD210.
PAGE 2
EPD - Type II Based on ISO 14021 20-PAP Corrugated fibreboard INNER CARD INSERT Notes on disposal One-way, recyclable 27g Total weight of device Materials The total weight of a device may deviate from the total of the weights of all individual components due to rounding.
PAGE 3
EPD - Type II Based on ISO 14021 PCBAs (Printed Circuit Board assembled) FR4; halogen-free; solder SnAgCu MAIN PCB,2-LAYER,78X78X1.
PAGE 4
EPD - Type II Based on ISO 14021 LCD 18 18 18 18 18 18 Relays(G5Q-14 DC5 BY OMZ) 18 18 18 10 10 10 16 16 16 Glass Lens 16 16 16 16 16 16 16 16 16 MAIN PCB,2-LAYER,78X78X1.
PAGE 5
EPD - Type II Based on ISO 14021 Packaging LABEL FOR WHITE BOX,CARTON [g] 1 1 1 1 1 1 1 1 1 INSTALLATION/OPERATION GUIDE,VRF,RDF280 6 6 6 6 6 6 6 6 6 LABEL,PRODUCT DATE & DMC CODE,Blank 0 0 0 0 0 0 0 0 0 PACKING,POLYBAG,WITHLOCK 1 1 1 1 1 1 1 1 1 PE Polybag 4 4 4 4 4 4 4 4 4 27 27 27 27 27 27 27 27 27 INNER CARD INSERT The device is classified as waste electronic equipment in terms of the European Directive 2012/19/EU (WEEE) and must not be disposed
PAGE 6
EPD - Type II Based on ISO 14021 Legal Disclaimer: This declaration is for information purpose only. This Environmental Product Declaration does not constitute a guarantee of the composition of a product, neither does it guarantee that the product will retain a particular composition for a particular period. BSCE therefore does not assume liability for any error or for any consequences which may arise from the use of this information to the maximum extent under the law.