User Manual

CERTIFICATE No:
253/13494/16
Delivered to
SIEMENS SCHWEIZ AG
SWITZERLAND
This is to certify that the underneath listed product:
RDF600KN Room Thermostat
Order number: RDF600KN
Application program: RDF600KN / 2.1
EIB logo: -
KNX logo: Yes
has been satisfactorily assessed by a KNX accredited test lab as regards software (report No. A1/253/1/17 from 5/17/2017)
resp. KNX Association as regards hardware, under the rules of the KNX certification system against the requirements of the
KNX specifications v2.1.
The certificate holder is granted right of entry of the above product into the KNX register of qualified products (established for
the first time on 6/12/2018).
The certificate holder may use the KNX or EIB (see above) trademark in accordance with the relevant trademark rules, as
laid down in the KNX trademark and certification documentation (KNX issue 02/2006).
Subject to continuing compliance with the rules and the declaration previously given this certificate has an unlimited validity.
Joost Demarest, CTO
KNX Association
Date: 01 October 2018
This certificate is not transferable and remains property of KNX Association cvba. KNX Association cvba has no liability for product failures after product
registration or certification.