Operation Manual

3/82
Siemens RDF301, RDF301.50, RDF600KN Basic documentation CE1P3171en
Building Technologies Contents 2012-10-04
3.11.5 Send heartbeat and receive timeout.......................................................50
3.11.6 Startup.....................................................................................................50
3.11.7 Heating and cooling demand ..................................................................50
3.11.8 Fault function on KNX .............................................................................51
3.11.9 KNX switching groups (RDF301.50 only) ...............................................52
3.12 Communication objects (S-mode)...........................................................54
3.12.1 Overview .................................................................................................54
3.12.2 Description of communication objects ....................................................55
3.13 Control parameters .................................................................................58
3.13.1 Parameter setting via local HMI ..............................................................58
3.13.2 Parameter setting / download via tool.....................................................59
3.13.3 Parameters of the "Service level" ...........................................................60
3.13.4 Parameters of the "Expert level with diagnostics and test"....................61
4. Handling.................................................................................................63
4.1 Mounting and installation ........................................................................63
4.2 Commissioning........................................................................................64
4.3 Operation ................................................................................................66
4.4 Remote operation....................................................................................67
4.5 Disposal ..................................................................................................67
5. Supported KNX tools............................................................................68
5.1 ETS .........................................................................................................68
5.1.1 Parameter settings in ETS ......................................................................68
5.2 ACS Service and Operating tool.............................................................69
5.2.1 Parameter settings in ACS......................................................................70
5.2.2 Operation and monitoring with ACS........................................................71
5.2.3 Operation and monitoring with OZW772 ................................................74
5.2.4 Operation and monitoring with RMZ972 .................................................74
6. Connection ............................................................................................75
6.1 Connection terminals ..............................................................................75
6.2 Connection diagrams ..............................................................................76
7. Mechanical design ................................................................................77
7.1 General ...................................................................................................77
7.2 Dimensions .............................................................................................78
8. Technical data .......................................................................................79
Index ................................................................................................................81