Technical data

The control parameters, ([Pxx] description) can also be adjusted and down-
loaded. Refer to section 3.14.
5.2 ACS tool
With the ACS tool, the RDG KNX thermostats can be commissioned (physical
address, application, parameters). They can be operated or monitored via bus
during normal operation.
This Manual does not describe how the physical address is defined. Also, it only
gives a brief overview of the main functionality of ACS.
For more information, refer to the ACS online help.
Setting RDG KNX parameters is only supported by ACS Version 5.11 or
higher.
5.2.1 Parameter settings in ACS
In the ACS program, select Plant, then Open to open the plant.
To start the parameter settings, select Applications, then Plant engineering…:
ACS
STOP
Note!
83 / 102
Siemens RDG100KN, RDG160KN Basic documentation CE1P3191en
Building Technologies Supported KNX tools 2014-05-23